樱桃成视频人app下载

Printable Page     Email Email This Page     Save To Favorites Save To Favorites
>>
<<
SelectDownloadInquiryDimension(mm)Basic load ratings(KN)Bearing NumberLoad center(mm)ConstantAxial load factors(Refer.) Mass(kg)
dDTBCRrCrCoraeY1
Download PDF 28 58 24 24 19 1 1 58 68.3 332/28 90.5 0.44 1.37 34.8
Download PDF 32 65 26 26 20.5 1 1 68.8 82.2 332/32 96.2 0.46 1.31 36.3
Download PDF
Download PDF
Download PDF
Download PDF
Download PDF
Download PDF
Download PDF
>>
<<

Figure2-1 Class P0 Tolerances for Metric Systems Tapered Roller Bearings (um)
Figure2-1(1) Diameter Tolerance and Radial Runout of Inner Ring  

image001.png

Figure2-1(2) Diameter Tolerance and Radial Runout of Outer Ring   

image002.png

Figure2-1(3) Width of Inner and Outer Rings, overall bearing and Components

image003.png

Figure2-2 Class P6X Tolerances for Metric Systems Tapered Roller Bearings (um)

Width of Inner and Outer Rings, overall bearing and Components

image004.png

NOTE: The diameter and radial runout tolerances of the inner ring and the outer ring of Class P6X are the same as those specified in the tolerances of Class 0 in Figure2-1(1) and Figure2-1(2)

Figure2-3 Class 6 Tolerances for Metric Systems Tapered Roller Bearings (um)

Figure2-3(1) Diameter Tolerance and Radial Runout of Inner Ring  

image005.png

Figure2-3(2) Diameter Tolerance and Radial Runout of Outer Ring  

image006.png

Figure2-3(3) Width of Inner and Outer Rings, overall bearing and Components

image007.png

Figure2-4 Class 5 Tolerances for Metric Systems Tapered Roller Bearings (um)

Figure2-4(1) Diameter Tolerance and Radial Runout of Inner Ring

image008.png

Figure2-4(2)   Diameter Tolerance and Radial Runout of Outer Ring

image009.png

NOTE: 1) Not applicable to flange outer ring bearing.

Figure2-5 Class 4 Tolerances Metric Systems Tapered Roller Bearings (um)
樱桃成视频人app下载Figure2-5(1) Inner Ring, Width of overall bearing and Components

image010.png

Figure2-5(2) Outer Ring, Width of overall bearing and Components

image011.png

樱桃成视频人app下载NOTE: 1) Not applicable to flange outer ring bearing.


Figure2-6 Tolerances for inch systems tapered roller bearings

Figure2-6(1) Tolerance of Inner Diameter, Width and overall Bearing Width


image012.png


Figure2-6(1) Tolerance of outer Diameter, Width and overall Bearing Width

image013.png

NOTE: Class 2 and 4 are often referred to as "standard" classes. Class 2 has certain tolerances more closely controlled than class 4.